Help For Using Flat Screen Printing Machine


The above is the relevant introduction of the setting machine manufacturer, I hope it will help you in the process of using the Flat Screen Printing Machine.

The main components of Stenter include feeding part, weft trimmer, chain, oven body and cloth doffing and rolling equipment. Others include chemical material system and oil furnace heating system. The following setting machine manufacturers introduce us to the detailed introduction of the setting machine parts.


1. Shaping machine manufacturer: Stenter feeding part
The feeding structure of the setting machine is relatively simple. It consists of a trough and a roller. The cloth enters the trough with chemical materials, and then the remaining chemical materials are squeezed clean by the rollers. Therefore, the chemical material on the cloth is very uniform, which is a prerequisite for high-quality equipment.

 

2. Setting machine manufacturer: Stenter weft straightener
The shaping opportunity is equipped with weft trimmers and corresponding sensors. Each set of sensors includes two parts: light-emitting and light-sensitive, which can produce weft skew through photoelectric effect. In the hydraulic system, when the deflection control signal returns to the size of the motherboard, the motherboard will announce the control command to the hydraulic drive system.

 

3. Setting machine manufacturer: Stenter chain part
The cloth passes through the tenter chain to form a final shape. Driven by the motor, near the needle plate and the chain drop cloth, the chain feeds the cloth when the machine is set up, the upper cloth roller brush wheel pushes on a small needle plate, the cloth pot is put into the oven, and the two chains drive . The chain of the setting machine can separately control the stretching of each pin clip, and then produce good results.

 

4. Setting machine manufacturer: Stenter oven body
The setting machine has eight groups of ovens, and the air is continuously sprayed on the cloth surface by the air jet under the effect of circulating electric fans. After the hot air touches the wet cloth, it passes through the filter and is heated by the heat exchanger to continuously circulate it.

 

The above is the relevant introduction of the setting machine manufacturer, I hope it will help you in the process of using the Flat Screen Printing Machine.