Process Requirements For Open Rotary Screen Printer


Hot Air Stenter can be widely used in the finishing process of woven fabrics, knitted fabrics and other textiles.

Hot Air Stenter can be widely used in the finishing process of woven fabrics, knitted fabrics and other textiles. The equipment has a wide range of functions, strong stability and reproducibility, simple operation, simple maintenance, energy saving, and high degree of automation. Hot Air Stenter can adjust the upper and lower wind speed according to the requirements of different varieties and craftsmanship, and has a more flexible means to give various styles to the finished fabric. The amplitude modulation screw on the top of the oven is set in the framework of the top of the oven, and is isolated from the circulating hot air. The screw rod hangs the chain track under it, and all the screw rods are driven by independent motors, which can be linked to the amplitude modulation. It can be adjusted independently. The advantage of the amplitude modulation screw not in the oven is that it completely avoids the blockage caused by the dust on the screw, mechanical failure, and avoids the contact between the fabric and the screw, and does not splash the fabric.

It feeds the unshaped cloth into the open rotary screen printer by the stripper in open width. The machine automatically hangs the two ends of the cloth on the needle plate. The two ends of the needle plate enter the oven with the step of the mechanical operation. The oven is powered by electricity. Heating, fan blowing, passing through several continuous constant temperature ovens with different temperature sections, entering the tail end, cooling to remove static electricity, swinging into the cloth car, and getting a stiff and beautiful cloth.