The Solution To The Wear Of The Open Type Rotary Screen Printer


the oil cup part of the Hot Air Stenter must be replaced with flat marble or steel plate to adjust

When the oil gutter knife edge of the Open Type Rotary Screen Printer is put into use for a long time, it is necessary to regrind the oil gutter blade of the open rotary screen printing machine.

  Method for grinding and repairing the oil-gut knife edge of the open rotary screen printing machine:

  1), the open rotary screen printing machine oil cup blade is placed on the grinding plate / 20003# grinding back and forth friction,

  2). Inject 3 to 5 drops of polishing liquid/polishing paste,

  3) Put on the cup-shaped magnetic ring of the open rotary screen printing machine,

  4), adjust the pressure, pay attention to the back and forth force to be even,

  5) Put four fingers into the cup and drive the magnetic ring to rotate counterclockwise without running around the iron plate for about 10-60 seconds.

  6) Remember to clean the residue ink marks in the oil cup, and clean the remaining parts of the glue seal.

  7), the oil cup part of the Hot Air Stenter  must be replaced with flat marble or steel plate to adjust