Depending on the climate and type of building, there are a lot of different insulation options in the market, such as concrete block, blanket, loose-fill, reflective system, sprayed foam, and so on. Each type of insulation is made from different materials and can have different uses. Today, we will be looking at different types of insulation and where they are used. But it is always best to get an expert - Whether you need underfloor insulation Auckland or ceiling insulation Auckland, getting an expert means that you save valuable time and money later down the road.
Different Types of Insulation
Let's explore some of the common types of insulation:
Blanket Insulation (Batt Roll)
Blanket insulation is the most common type of insulation and is widely available as well. Normally, it comes in "batts or rolls" form and usually consists of a fiberglass or some other type of flexible fibers. But you can also such types of insulation made from other materials such as natural fibers, plastic fibers, cotton, and wool (sheep). Blanket insulation can be used in floor joists, rafters, and wall studs. There are a lot of Insulation companies Auckland with the required expertise to install a lot of different insulations.
- R-15 or R-13 batts can be used on a 2 inches x 4 inches wall.
- R-21 or R-19 batts can be used on a 2 inches x 6 inches wall.
On the other hand, continuous rolls are more flexible as they can be trimmed and hand-cut to fit any size. Depending on your requirements, you may need it with facings or without it. Generally, it is common for the manufacture to include a facing such as vinyl or kraft paper. You may be wondering what the benefit of including a facing is? Well, it acts as a barrier to stop the air and vapors! If you are looking for this type of Insulation installers in Auckland, you can consider Premier Solutions as well.
There are also some types of batts that come with flame-resistant facing. This type is normally used in the basement walls and similar places where the insulation is usually exposed.
Concrete Block Insulation
Concrete blocks are an excellent material for building walls and home foundations. To properly insulate the concrete blocks, the cores need to be filled with insulation material. But that would only be possible if the cores and steel are not filled in the cores. As a result of this insulation, the R-value (average) will be raised.
But studies have shown that despite filling the core with insulating material, there are very little fuel savings. The reason for this is that the wall's solid parts can readily conduct the heat.
For installing the insulation on the concrete blocks, the most effective parts are either the interior or the exterior of the foundation walls. If you decide to add insulation on the exterior, it will improve the indoor temperatures.
There are also manufacturers who have started to add polystyrene beads into the blocks of concrete. Then there are some who decide to add rigid foam inserts in the concrete block. For Home insulation Auckland, it is best to consult an expert so they can help you choose the right insulation.
