Introduction Of Screen Maintenance Of Open Type Rotary Screen Printing Machine


The screen of the Open Type Rotary Screen Printing Machinemust be stored in a dry and clean place.

  1. The screen of the Open Type Rotary Screen Printing Machinemust be stored in a dry and clean place. Do not use water, alcohol and other water solvents to clean the screen, especially when cleaning the printing surface of the screen, it should not be too strong. It must be washed with slow dry water and stored.
  2. Pay attention to the sharp corners and burrs of the printed products, which may scratch the screen.
  3. Pay attention to the rainy weather, the air is humid, and the screen is very damaged. Please pay attention to it.
  4. The cleaned screen must be placed in a screen cabinet, neatly arranged and clearly marked, so that the corresponding screen can be found quickly and accurately when it is convenient to use.
  5. If oil leakage, damage or screen printing fonts become thicker or thinner on the screen version, it shall be scrapped after being confirmed to be unusable through the quality assurance, and the new plate making will be re-arranged by the screen printing workshop director.
  6. For the more frequently used screen version, you need to make a backup screen version.
  7. The Flat Screen Printer Factoryreminds everyone that before using the new screen for the first printing, the screen must be confirmed in all aspects, including: font size, font size, line thickness, pattern, printing position size, whether there is Disconnection, whether the mesh is intact, etc., can be used only after confirmation.